One Power Sourcing for Multi Powered Devices Solution
PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 802.3af/at PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet. The solution works in pairs for point to point and point to multi-point connectivities.
Point to Multi Points
Type 1: Remote LRP Power through BNC/RJ45 with DC 56V input
The LRP-101 Injector, powered by IEEE 802.3at/af PoE or DC power adapter, transmits data and power over coaxial/ UTP cable to the LRP-104CET extender. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-104CET via UTP cabling.
Type 2: Local Power with External DC Input (DC 24V~48V)
The LRP-101 Injector, powered by IEEE 802.3at/af PoE or DC power adapter, transmits data through coaxial/ UTP cable to the LRP-104CET extender powered by external DC power. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-104CET via UTP cabling.
Multi Points to Multi Points:
Type 1: Remote LRP Power through BNC with DC 56V input
The LRP Switch, powered by itself, transmits data and power over coaxial cable to the LRP-104CET extender. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-104CET via UTP cabling.
Type 2: Local Power with External DC input (DC 24V~48V)
Powered by external DC power, the LRP Switch transmits data through coaxial cable to the LRP-104CET extender. An IEEE 802.3at/af compliant PoE PD will then automatically be powered by the LRP-104CET via UTP cabling.
|Ethernet Interface||■ Copper Ports
• Four 10/100BASE-TX RJ45 auto-MDI/MDI-X■ PoE Injector Ports
• Four ports with 802.3at/af PoE injector function with Port-1 to Port-4
■ PoE Standards Compliance
■ PoE Type
■ PoE Power output
■ Maximum Distance
■ Maximum Frame size
|Long Reach PoE Interface||■ Connectivity
• One BNC female Long Reach PoE over Coaxial PD
• One RJ45 connector Long Reach PoE over UTP PD■ Power Input
• 44~ 56V DC
■ Power Pin Assignment
■ Maximum Distance
■ Long Reach Ethernet Stan dard
■ Modulation Type
■ Frequency Band
■ LRP Compatibility
|LED Indicator||3 x LED for External Power Supply:
DC Power 1 (Green)
DC Power 2 (Green)
Power Fault ( Red )
4 x LED for PoE Usage:
2 x LED for Long Reach PoE In:
2 x LED for each RJ45 interface (Port-1 and Port-4)：
10/100Mbps LNK/ACT (Green)
|Installation||DIN rail kit and wall-mount kit|
|Dimensions (W x D x H)||135 x 87.8 x 56 mm|
|Power Requirements||44~56V DC power over coaxial input
DC 24~48V, redundant power with polarity reverses protection function
|Power Consumption/Dissipation||130 watts/446BTU (Ethernet with PoE Full Loading)|
|Alarm||One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC|
|Standards Compliance||IEEE 802.3 Ethernet/10BASE-T
IEEE 802.3u Fast Ethernet/100BASE-TX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3at Power over Ethernet Plus
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Stability Testing||IEC60068-2-32 (free fall)
|Temperature||Operating: -20~70 degrees C
Storage: -25~75 degrees C
|Humidity||Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
*As there are various resistance values in the category of RG-59/U or RG-6/U cable, the actual data rate will vary on the quality of the copper wire and environmental factors.
**Depending on what the DC/PoE power input and the length of coaxial cable are.