- Applicazioni
- SPECIFICHE
- DOWNLOAD
Descrizione
Gigabit PoE++ and PoE+ Network Deployment
The UPOE-2400G provides the easiest way to power your Ethernet devices such as IP camera on the ceiling and the wireless access point installed on the top of the building. With 24 10/100/1000BASE-T Gigabit Ethernet ports, the UPOE-2400G supports full 54V DC power for any remote IEEE 802.3at/IEEE 802.3bt powered device (PD).
To control the power system of your networking devices, the UPOE-2400G can directly co-work with network devices such as PoE IP phone to build VoIP telephony network in the office. The 802.3bt PoE++ injector hub can be directly connected to any third-party IEEE 802.3bt and 802.3at PoE compliant devices installed within 100 meters. Furthermore, the UPOE-2400G can extend much longer distance by using PLANET PoE Extender for powering up the PoE PD which can be installed over more than 100 meters away.
| Hardware | |
|---|---|
| Interface | “Data” Input Ports: 24 x RJ45 “Data + Power” Output Ports: 24 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX |
| Data Rate | 10/100/1000Mbps |
| LED | System: SYS PWR x 1 (Green) PoE Failure x 1 (Red) Fan Failure x 2 (Red) Management Port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: 802.3bt/UPoE PoE-in-use x 1 (Green) 802.3at PoE-in-use x1 (Orange) |
| Power Requirements | 100-240V AC, 50/60 Hz, 15A |
| Power Consumption | 1000 watts (max.)/3412BTU |
| Ventilation | Fan x 3 |
| Dimensions (W x D x H) | 440 x 300 x 44.5 mm, 1U height |
| Enclosure | Metal |
| Weight | 5.5kg |
| Power over Ethernet | |
| PoE Standard | 802.3bt PoE++ PSE Backward compatible with IEEE 802.3at PoE PSE |
| PoE Power Supply Type | ■ 802.3bt ■ UPoE ■ End-span ■ Mid-span ■ Force |
| PoE Power Output | Per port 54V DC ■ 802.3bt mode, Port-1 to Port-8: maximum 90 watts ■ 802.3bt mode, Port-9 to Port-24: maximum 60 watts ■ UPoE mode, Port-1 to Port-8: maximum 95 watts ■ UPoE-mode, Port-9 to Port-24: maximum 72 watts ■ End-span mode: maximum 36 watts ■ Mid-span mode: maximum 36 watts |
| Power Pin Assignment | ■ 802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-) ■ UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-) ■ End-span: 1/2(-), 3/6(+) ■ Mid-span: 4/5(+), 7/8(-) |
| PoE Power Budget | 800 watts (max.) |
| Number of 90W 802.3bt Type-4 PDs | 8 |
| Number of 60W 802.3bt Type-3 PDs | 13 |
| Number of 802.3at PDs | 24 |
| Management | |
| Management Interface | Web, PLANET Smart Discovery Utility |
| Management Feature | Setup of system/management functions Web firmware upgrade SNMP trap for alarm notification of events |
| PoE Management | Power limit by consumption PoE admin mode Per port power schedule Per port power enable/disable Per port PoE operation mode selection Power feeding priority Over temperature protection Current per port usage and status Total power consumption PD alive check Scheduled power recycling |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 2273: SNMPv3 RFC 5424: Syslog |
| Network Cable | 10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat5e/6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m) |
| Environments | |
| Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing) |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing) |
