MGSD-10080F
13″ 8-Port 100/1000Base-X SFP + 2-Port 10/100/1000Base-T L2/L4 Managed Metro Ethernet Switch (AC+2 DC, DIDO), ERPS Ring Supported
- Applicazioni
- SPECIFICHE
- DOWNLOAD
Descrizione
Optimized Design for Metropolitan Area Network
By means of improving the technology of Optical Fiber Ethernet with high-flexible, high-extendable and easy-installation features, the MGSD-10080F offers the data exchange speed of Optical Fiber up to 1Gbps, and the distance of Gigabit Optical Fiber up to 120km. It supports service providers, such as ISP and Telecom, to install Metropolitan Area Network (MAN) based on Fiber technology to the WAN Internet Service.
Excellent Solution of Core / Department Switch
With 10 Gigabit ports, the MGSD-10080F is able to connect up to 10 edge switches in the Ethernet environment. Moreover, the MGSD-10080F provides 20 Gigabit per second switch fabric and high bandwidth for backbone connection. The MGSD-10080F is an excellent choice of core layer switch for a Gigabit network.
| Hardware Specification | |||||
|---|---|---|---|---|---|
| SFP/mini-GBIC Slots | 8 1000Base-SX/LX/BX SFP interfaces, from port 1 to port 8 Compatible with 100Base-FX SFP |
||||
| Copper Ports | 2 10/ 100/1000Base-T RJ-45 auto-MDI/MDI-X ports | ||||
| Console Port | 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1) | ||||
| Switch Architecture | Store-and-Forward | ||||
| Throughput (packet per second) | 14.8Mpps @ 64Bytes packet | ||||
| Switch Fabric | 20Gbps / non-blocking | ||||
| Address Table | 8K entries, automatic source address learning and ageing | ||||
| Share Data Buffer | 4Mbits | ||||
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
||||
| Jumbo Frame | 9Kbytes | ||||
| Reset Button | < 5 seconds: System Reboot > 10 seconds: Factory Default |
||||
| Dimensions (W x D x H) | 330 x 155 x 43.5 mm, 1U high | ||||
| Weight | 1661g | ||||
| LED Indicator | System: PWR (Green) DC 1 (Green) DC 2 (Green) Fault Alarm (Green) Ring* (Green) Ring Owner* (Green) Per Gigabit Ports: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) |
||||
| Power Consumption | Max. 11.2 Watts / 38.2 BTU (AC input) Max. 10.8 Watts / 36.9 BTU (DC input) |
||||
| Power Requirements | AC 100~240V, 50/60Hz 0.15A -36V DC @ 0.3A, Range: -36V ~ -72V DC |
||||
| Alarm | One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V |
||||
| DI/DO | 2 Digital Input (DI) Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24VDC, 100mA max. |
||||
| Layer 2 Function | |||||
| Port Configuration | Port disable / enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Bandwidth control on each port Power saving mode control |
||||
| Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
||||
| Port Mirroring | TX / RX / Both 1 to 1 monitor |
||||
| VLAN | 802.1Q Tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs |
||||
| Link Aggregation | IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 8-Port trunk support |
||||
| QoS | Traffic classification based, Strict priority and WRR 8-Level priority for switching – Port Number – 802.1p priority – 802.1Q VLAN tag – DSCP/TOS field in IP Packet |
||||
| IGMP Snooping | IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support |
||||
| MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support |
||||
| Access Control List | IP-based ACL / MAC-based ACL Up to 123 entries |
||||
| Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
||||
| Management | |||||
| Basic Management Interfaces | Console, Telnet, Web Browser, SNMP v1, v2c and v3 | ||||
| Secure Management Interface | SSH, SSL, SNMP v3 | ||||
| SNMP MIBs | RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC-3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB |
||||
| Standards Conformance | |||||
| Regulation Compliance | FCC Part 15 Class A, CE | ||||
| Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid Spanning tree protocol IEEE 802.1s Multiple Spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 |
||||
| Environment | |||||
| Operating |
|
||||
| Storage |
|
||||
