Industrial 2-port 10/100/1000T to 2-port 100/1000/2500X SFP Media Converter


Flexible, Reliable and Industrial-grade Network Distance Extension Solution

PLANET IGT-2205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with two 10/100/1000BASE-T RJ45 copper port and two 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-2205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.


Fiber-Optic Link Capability Enables Extension of Network Deployment

The two SFP ports are compatible with 100BASE-FX, 1000BASE-X and 2500BASE-X SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 300 meters (Multi-mode fiber cable) to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable), and also the Fast Ethernet distance can be extended from 2km (Multi-mode fiber cable) to 20/40/60 kilometers (Single-mode fiber cable). They are well suited for applications within the factory data centers and distributions.


IGT 1205ATv2 IGT 2205AT 1


Hardened Environment Application

PLANET IGT-2205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGT-2205AT is also compatible with 100/1000/2500Mbps SFP transceivers to provide a strong, stable and long-distance connection and flexible industrial networking deployment.

Redundancy Application

The IGT-2205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.


Hardware Specifications
Copper Interface 2 x 10/100/1000BASE-T RJ45
Fiber Optic Interfaces 2 x 100/1G/2.5GBASE-X SFP interfaces (Port-1 and Port-2)
Supports auto detection
Connector Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
LED System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Alarm
Per Copper Port (Port-3~Port-4):
Green: 1G LNK/ACT
Amber:100 LNK/ACT
SFP interface (Port-1~ Port-2)
Green + Amber: 2.5G LNK/ACT
Green: 1G LNK/ACT
Amber:100 LNK/ACT
DIP Switch  

Fiber Mode ON Fiber Redundancy
OFF (default) Switch Mode
Alarm Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Power Requirements DC 12~48V or AC 24V
Redundant power with reverse polarity protection
Power Consumption / Dissipation 4.92 watts/16.9BTU
Dimensions (W x D x H) 32 x 87 x 135mm
Weight 419g
Enclosure IP30 type metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Converter Specifications
Processing Scheme Store-and-Forward
Fabric 14Gbps
Throughput (packet per second) 10.42Mpps@64bytes
Flow Control Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex
Address Table 4K entries
Jumbo Frame 9216bytes
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1p Class of Service
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32 (free fall)
IEC60068-2-6 (vibration)
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)