ISW-800T

IP30 Compact size 8-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C)

Descrizione

ISW-800T

Progettato per le industrie pesanti

Lo chassis in metallo IP30 è progettato in particolare per industrie pesanti, come fabbriche, porti, magazzini ecc. Se installato in queste sedi, è in grado di migliorarne le prestazioni lavorative trasferendo rapidamente i dati in entrata e in uscita.

 

Hardware Specifications
Copper Ports 8 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
Switch Architecture Store-and-Forward
Switch Fabric 1.6Gbps (non-blocking)
Throughput (packet per second) 1.19Mpps@ 64 bytes
Address Table 1K entries, automatic source address learning and aging
Shared Data Buffer 448K bits
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
ESD Protection 6KV DC
Enclosure IP30 metal case
Installation DIN rail kit and wall-mount kit
Connector Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
LED Indicator System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm ( Red )
Per 10/100TX RJ45 Ports:
10/100 LNK/ACT (Green)
Dimensions (W x D x H) 70 x 115 x 41 mm
Weight 300g
Power Requirements Dual 12~48V DC, 24V AC
Power Consumption Max. 1.1 watts/3.77BTU (Power on without any connection)
Max. 2.5 watts/8.57BTU (Ethernet full loading)
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3x flow control and back pressure
IEEE 802.1p Class of Service
IEEE 802.1X Port Authentication Network Control
IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)