GSD-1222VHP

8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1000SX SFP Gigabit Switch with smart color LCD (120W PoE Budget, Standard/VLAN/Extend mode, PoE Budget, bandwidth control, PD alive check setup over LCD )

Descrizione

Perfectly-integrated Solution for PoE IP Camera and NVR System

With its 24Gbps high-performance switch architecture and 120-watt PoE power budget, the recorded video files from the 8 PoE IP cameras powered by the GSD-1222VHP are saved in the 8-channel NVR systems or surveillance software in the monitoring center for possible backup references.

GSD 1222VHP 5 L

Ideal PoE Switch for All Enterprises

Providing eight 802.3at PoE+ in-line power interfaces, the GSD-1222VHP can easily build a power that centrally controls IP phone system, IP camera system and wireless AP group for enterprises. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the need for power sockets, the GSD-1222VHP makes the installation of cameras easier and more efficient.

GSD 1222VHP 6 L

Hardware Specifications
802.3af/802.3at PoE Injector Port 8
10/100/1000BASE-T MDI/MDIX Ports 8
10/100/1000BASE-T MDI/MDIX Ports 2
1000BASE-X SFP/mini-GBIC Slots 2
Switch Architecture Store-and-Forward
Switch Fabric 24Gbps/non-blocking
Switch Throughput@64 bytes 18Mpps@64 bytes
MAC Address Table 8K entries
Maximum Frame Size 9216 bytes
Flow Control IEEE 802.3x pause frame for full duplex; back pressure for half duplex
LED System:
Power (Green)PoE interfaces:
PoE-in-Use (Orange)

10/100/1000BASE-T RJ45 Interfaces:
10/100Mbps LNK/ACT (Red)
1000Mbps LNK/ACT (Green)

1000BASE-X SFP Interfaces:
LNK/ACT (Green)

LCD Monitor (W x D) 40.6mm x 30.5mm, 2-inch
Buttons Menu, Enter, Back, Up and Down
Dimensions (W x D x H) 180 x 280 x 44mm (1U height)
Enclosure Metal
Weight 1.8kg
Power Requirements 100~240V AC, 50/60Hz, 2.5A max.
Power Consumption/Dissipation Max. 130watts/446 BTU
Thermal Fan 1
ESD Protection Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Surge Protection ±6KV
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at)
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts
Max. Number of Class 2 PDs 8
Max. Number of Class 3 PDs 8
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
Operating Temperature: -10 ~ 60 degrees C
Relative Humidity: 10 ~ 90% (non-condensing)
* Temperature<40 degrees C; Humidity<90%
Temperature>40 degrees C; Humidity<50%
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)