ISW-504PT

IP30 5-Port 10/100TX , Con 4 Porte PoE 802.3af Industrial Fast Ethernet Switch (-40 to 75 C), Power Input 12-48VDC- Output per port PoE 48VDC

Descrizione

Una soluzione di alimentazione PoE+ completa perfetta, ideale per ambienti difficili

Con design Plug and Play, lo switch PoE+ Fast Ethernet non gestito di tipo DIN-rail di livello industriale PLANET ISW-504PT, dotato di 4 porte IEEE 802.3at PoE+10/100BASE-TX e 1 interfaccia Fast Ethernet RJ45 aggiuntiva per la connessione uplink, consente di rilevare e configurare automaticamente periferiche interne ed esterne. Con un robusto alloggiamento in metallo IP40 e un sistema di alimentazione ridondante per un budget di potenza totale fino a 120 watt per diversi tipi di applicazioni PoE, ISW-504PT funziona in modo efficiente anche in ambienti difficili, con un intervallo di temperatura di esercizio da -40 a 75 gradi Celsius.

In risposta alla crescente domanda di infrastrutture IIoT (Industrial Internet of Things), ISW-504PT è progettato per una facile distribuzione di reti industriali con la sua capacità Plug and Play. Inoltre, garantisce una trasmissione veloce e stabile di dati e potenza. ISW-504PT supporta anche il pass-through del traffico PROFINET con QoS, il che lo rende la scelta ideale per l’integrazione con sistemi di automazione industriale e per migliorare la comunicazione tra dispositivi in ​​un ambiente di fabbrica.

 

pannello frontale dello switch Planet industriale ISW-504PT

 

Switch Industriale PoE+ per Building Automation e Sicurezza

Adatto per gli edifici in cui la sicurezza viene applicata in maniera rigorosa, lo switch ISW-504PT, dotato di quattro porte Ethernet 802.3at PoE+, permette di costruire facilmente un’alimentazione che può controllare centralmente un sistema di telefonia IP, di videosorveglianza IP e gruppo di Access Point wireless in ambienti industriali difficili. Ad esempio, 4 telecamere IP PoE o AP PoE wireless possono essere facilmente installati in ambiente industriale per esigenze di sorveglianza o per una rete di roaming wireless. Senza la limitazione di presa di corrente, rende l’installazione di telecamere IP o di AP wireless più semplice ed efficiente.

 

switch ideale per automazione e sicurezza

 

 

 

Estensione della distanza di trasmissione dei dati Ethernet 

ISW-514PTF integra un DIP switch che permette di selezionare le modalità di funzionamento ” Standard “, ” VLAN ” e ” Extended “.

In modalità operativa “ Standard ” (impostazione predefinita), lo switch funziona come un normale switch IEEE 802.3af/at PoE +

 

modalità operativa standard

 

In modalità “VLAN“, la funzione VLAN basata su porta permette di evitare che multicast o broadcast storm delle telecamere si influenzino a vicenda.

 

modalità operativa Vlan

 

 

In modalità  “Extend” opera su una base per-port con funzionamento full duplex a 10Mbps e può supportare un output PoE di 25 watt fino a 250 metri di distanza, superando il limite dei 100 metri del Cavo UTP Ethernet.

 

modalità operativa Estesa

 

Implementazione della rete PoE semplice e sicura

Grazie al trasporto simultaneo di dati e alimentazione Ethernet, ISW-504PT riduce i requisiti di cablaggio ed elimina la necessità di prese elettriche dedicate a parete, a soffitto o in qualsiasi luogo non raggiungibile, permettendo di utilizzare un unico cavo Ethernet per installare e distribuire telecamere IP, AP wireless o telefoni VoIP in modo più efficiente e conveniente.

 

ISW 504PTv3 514PTFv3 4

Hardware Specifications
Fast Ethernet Copper Ports Five 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-5)
PoE Injector Port Four ports with 802.3af/at PoE+ injector function (Port-1 to Port-4)
Switch Architecture Store-and-Forward
Switch Fabric 1Gbps/non-blocking
Switch Throughput@64 bytes 0.74Mpps @64 bytes
MAC Address Table 1K entries
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 1536 Bytes
DIP Switch (Port-1 to Port-4) Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps
VLAN mode: “Port-based VLAN Protection” where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps
LED Indicators 3 x LED for System and Power:
  • Green: DC Power 1
  • Green: DC Power 2
  • Red: Power Fault Alarm

2 x LED for PoE Copper Port (Port-1~Port-4):

  • Green: LNK/ACT (10/100Mbps)
  • Orange: PoE-in-Use

1 x LED for 10/100TX Copper Port (Port-5):

  • Green: LNK/ACT

4 x LED for PoE Usage

  • Orange
Connector Removable 6-pin terminal block
  • Pin 1/2 for Power 1
  • Pin 3/4 for power fault alarm
  • Pin 5/6 for Power 2
Alarm One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
Power Requirements 12~48V DC, 7A (max.)
Power Consumption/ Dissipation 3.7 watts, 12.6 BTU (Standby without PoE function) at DC 12V power input
70 watts, 238.8 BTU (Full loading with PoE function) at DC 12V power input
4.6 watts, 15.7 BTU (Standby without PoE function) at DC 24V power input
105.1 watts, 358.6 BTU (Full loading with PoE function) at DC 24V power input
4.8 watts, 16.4 BTU (Standby without PoE function) at DC 48V power input
136.8 watts, 466.8 BTU (Full loading with PoE function) at DC 48V power input
Dimensions (W x D x H) 50 x 85.1 x 135 mm
Weight 596g
ESD Protection 5KV DC
Enclosure IP40 metal case
Installation DIN-rail kit and wall-mount kit
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Output Per port 54V DC , max. 36 watts
PoE Power Budget (max.) 60W @12V DC input
90W @24V DC input
120W @48V DC input
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)