IMG-110T
Industrial 1-port RS422/485 Serial to Ethernet Modbus Gateway, -40~75 degrees C, 9~48V DC
- Applicazioni
- SPECIFICHE
- DOWNLOAD
Descrizione
RTU/ASCII Master to Multi Modbus TCP/IP Slaves
IMG-110T può fungere da ponte tra l’apparecchiatura master RTU/ASCII industriale e i dispositivi slave TCP/IP industriale in un ambiente di rete Modbus TCP/IP, per controllare i dispositivi slave TCP/IP industriali tramite l’apparecchiatura master RTU/ASCII industriale.
| Serial Port | |
|---|---|
| Interface | RS422/RS485 x 1 |
| Connector | 5-contact terminal block for RS422/RS485 |
| Surge Protection | 1KV |
| Baud Rate (Data Rate) | 300bps to 115200bps |
| Data Bits | 7, 8 |
| Parity Type | Odd, Even, None, Space, Mark |
| Stop Bit | 1, 2 |
| Flow Control | H/W, None |
| Signals | RS422 : Tx+, Tx-, GND, Rx+, Rx- RS485: Data A (+), GND, Data B (-) |
| Distance | RS422/RS485 for 20m transfer distance |
| Operation Mode | RTU Master/RTU Slave/ASCII Master/ASCII Slave Master mode: Supports up to 32 slave TCP connection requests Slave mode: Supports up to 16 TCP master connection requests |
| Fast Ethernet Port | |
| Standard | IEEE 802.3 10BASE-T standard IEEE 802.3u 100BASE-TX standard IEEE 802.3x Full-duplex flow control |
| Connector | RJ45 |
| Distance | 100 meters |
| Hardware | |
| Copper Port | 10/100BASE-T RJ45 TP x1, auto-MDI/MDI-X, auto-negotiation |
| Serial Port | RS422/RS485 x 1 |
| DIP Switch | Reset system to factory default |
| LED Indicators | System: Power x 1 10/100BASE-TX Port: Link/Active x 1 RS422/RS485 Serial Port: TX (Transmit) x 1, RX (Receive) x 1 |
| Operation Mode | RTU Master RTU Slave ASCII Master ASCII Slave |
| Dimensions (W x D x H) | 69 x 100 x 22 mm |
| Weight | 238g |
| Power Input Connector | 2-contact terminal block connector DC power (9-48V) * |
| Power Consumption | 1.61 watts/5.4BTU (max.) |
| Installation | Wall-mount kit |
| Mechanical | Metal |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 10BASE-T standard IEEE 802.3u 100BASE-TX standard IEEE 802.3x Full-duplex flow control EIA/TIA RS422/485 |
| Regulatory Compliance | FCC Part 15 Class B, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) |
| *Remarks | Please follow the DC power input symbol from the front panel of the IMG-110T — insert positive DC power wire into V+, and negative DC power wire into V-. Otherwise, it will damage the device. |
