FGSD-1008HPS

8-Port 10/100TX 802.3at POE + 2-Port Gigabit TP/SFP Combo Managed Ethernet Switch (120W,IPv4/IPv6 Management, SNMPv3,802.1s MSTP,802.1x Authentication,ACL,PR Alive Check, Cybersecurity features)

Descrizione

PDs are Centrally Managed

Providing 8 10/100BASE-TX PoE+ ports, in-line power interfaces and two Gigabit TP/SFP combo interfaces, the FGSD-1008HPS can easily build an IP camera system for the enterprises where its power is centrally controlled. It can work with one 8-channel NVR to perform comprehensive security monitoring with 8 IP cameras via one Gigabit TP/SFP combo port. The FGSD-1008HPS comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing flexibility to building a network infrastructure at a low cost.

FGSD 1008HPSv2 1

 

High-performance PoE Network Connectivity

All of its ports are 802.3af/at compliant, thus making high-performance Fast Ethernet network connectivity with PoE IP telephones, PoE IP cameras, PoE wireless access points and other devices possible, all at reasonable costs. The FGSD-1008HPS improves the network efficiency and protects the network clients with its following powerful features:

  • Layer 2 to Layer 4 security
  • QoS, 802.1Q VLAN, static trunk, LACP
  • Multicast IGMP snooping

FGSD 1008HPSv2 2

Hardware Specifications
Copper Ports 8 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
PoE Injector Port 8 802.3af/802.3at PoE+ injector ports
Gigabit Copper Ports 2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Port-9 to Port-10
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps/non-blocking
Switch Throughput@64bytes 4.16Mpps @64bytes
MAC Address Table 16K entries
Shared Data Buffer 4Mb
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Maximum Transmit Unit 1522 bytes
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
LED System:
Power (Green)
10/100TX RJ45 Interfaces (Port 1 to Port 8):
LNK/ACT (Green), PoE-in-Use (Orange)
10/100/1000BASE-T RJ45 / SFP Interfaces (Port 9 to Port 10):
LNK/ACT (Green), 1000 (Green)
PoE Usage:
30W, 60W, 90W, 120W (Orange)
Thermal Fan 1
Power Requirements 100~240V AC, 50/60Hz, 2A (max.)
Power Consumption/Dissipation Max.150watts/511BTU
Dimensions (W x D x H) 330 x 155 x 43.5 mm
Weight 1.5kg
Enclosure Metal
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6 (-)
PoE Power Output Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 52V DC, 600mA. Max. 36 watts (IEEE 802.3at)
PoE Power Budget 125 watts
Number of PDs, 7 watts 8
Number of PDs, 15.4 watts 8
Number of PDs, 30 watts 4
Layer 2 Functions
Port Mirroring TX/RX/both
Many-to-1 monitor
VLAN Port-based VLAN, up to 10 VLAN groups
IEEE 802.1Q tagged VLAN
– Up to 256 VLAN groups, out of 4094 VLAN IDs
Protocol VLAN
Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
GVRP
Voice VLAN
Link Aggregation IEEE 802.3ad LACP supports one 2-port trunk group; static trunk supports one 2-port trunk group
Spanning Tree Protocol IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU filtering, BPDU Guard
IGMP Snooping IPv4 IGMP snooping v1/ v2 and v3
MLD Snooping IPv6 MLD snooping v1, v2
Access Control List IPv4/IPv6 IP-based ACL
MAC-based ACL
QoS Ingress/Egress Rate Limit per port bandwidth control
Storm Control support
– Broadcast/ Multicast /DLF (Destination Lookup Failure)/ARP/ICMP
Traffic classification
– IEEE 802.1p Qos/CoS
– TCP/UDP/DSCP/IP precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS policies
Security Access Control List
– IPv4/IPv6 IP-based ACL
– MAC-based ACL
Port-MAC-IP Address Binding
– Port-MAC-IP Port Setting
– Port-MAC-IP Entry Setting
MAC Address Binding
– Static MAC
– MAC Filtering
DHCP snooping to filter distrusted DHCP messages
ARP Inspection discards ARP packets with invalid MAC address to IP address binding
Management Functions
Basic Management Interfaces IPv4 and IPv6 dual stack management
Switch management interface
– Web switch management
– Telnet command line interface
– SNMP v1, v2c and v3
BOOTP and DHCP for IP address assignment
System maintenance
– Firmware upgrade via HTTP
– Configuration upload/download through web interface
– Hardware-based reset button for system reset to factory default
SNTP Network Time Protocol
Link Layer Discovery Protocol (LLDP)
Event message logging to remote Syslog server
PLANET smart discovery utility
Secure Management Interfaces SNMP v3, SSH, SSL
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)