IEEE802.3af POE Repeater (Extender)


Long Distance PoE IP Surveillance

Is 100 meters cable long enough to meet a wide range of IP surveillance deployments? The answer is certainly not. To apply the benefits of IP surveillance and also to achieve long-distance IP camera distribution, the POE-E101 PoE extender, is a quick and cost-effective option besides adopting a PoE Injector or PoE Ethernet Switch equipped with fiber optical interface. In the simplest application, the POE-E101 enables a PoE IP camera to be installed up to 200 meters away from a PoE Injector. The PoE Injector delivers PoE power over the first 100 meters to the POE-E101 over UTP cable, and then the POE-E101 forwards the Ethernet data and remaining POE power to the PoE IP camera. The POE-E101 does not require an external power supply and can be installed easily by just plug and play, meaning the operator does not need to configure the POE-E101.


Long Distance PoE Wireless Access Point

When being used in wireless LAN implementations, the POE-E101 enables wireless access points to be connected using standard Cat5e/6 cable over 100 meters from the power sourcing equipment (PSE), such as PoE switch, PoE injector hub and single port PoE injector. The POE-E101 is also powered by the incoming PoE on the Ethernet cable and does not require an external power feed. The POE-E101 will reduce the usage of cables and eliminate the need of dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the security IP cameras and wireless APs deployment from restrictions of power outlet locations.

LAN IN 1 x 10/100Base-TX Ethernet with IEEE 802.3af PoE “Data + DC” in
Auto MDI/MDI-X, auto-negotiation RJ-45 connector
LAN OUT 1 x 10/100Base-TX Ethernet with IEEE 802.3af PoE “Data + DC” out
Auto MDI/MDI-X, auto-negotiation RJ-45 connector
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet
PoE Power Supply Type Mid-Span / Type B
PoE Power Output 48V DC, 270mA, Max. 13Watts
Power Pin Assignment 4/5(+), 7/8(-)
Maximum Distance Class 1 (3.8 watts): 300m
Class 2 (6.5 watts): 300m
Class 3 (12.9 watts): 200m
Non-PoE (Data): 300m
Hardware Specifications
Hardware Version Version 2
Data Rate 10/100Mbps
Switch Architecture Store-and-Forward
Switch Throughput 148810pps@64Bytes
Latency 7.840µs
Maximum Frame Size 1552Bytes
Flow Control Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED Indicators 1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green)
Protection ESD(Ethernet): 6KV
Surge (EFT for power) : 6KV
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 215g
Power Requirements IEEE 802.3af compliant with voltage within 44V-56V DC
Power Consumption 2 watts (maximum)
Mechanical Metal / wall mountable and optional DIN-rail kit for installation
Cable TIA / EIA-568, Category 5/5e cable
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standard Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 10/100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet PSE / Mid-Span
IEEE 802.3af Power over Ethernet PD / Mid-Span
IEEE 802.3x Flow Control
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 0 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)